ISO 9185 Molten Metal Splash Test Device
Product Profile
The thermal penetration resistance of protective clothing materials
used to prevent a large number of molten metal splashes was
evaluated by the anti-liquid molten metal splashing test device
developed according to ISO9185 standard. Medium such as molten
aluminium, molten cryolite, molten copper, molten iron and spatter
of molten low carbon steel directly acted on the surface of the
material. The penetration resistance of protective clothing
materials was evaluated by the damage degree of PVC film attached
to the back of the sample.
Performance characteristics
1. The anti-liquid metal bead splash test device includes high
frequency heating device, sample frame, crucible support, sample
frame rotating device, high temperature radiometer, etc.
2. The high temperature radiometer can measure the melting metal
temperature up to 1650 C, and the accuracy can reach (+10) C.
3. The metal solution pouring device rotates at a constant angular
speed and can pour the sample.
4. High frequency heating device, which can be used to melt
aluminium, copper, iron and mild steel, can be heated to 1800
degrees.
5. Protective framework and toughened glass observation window are
equipped to protect the safety of testers.
6. The bracket arm control unit can be used for lifting and
rotating the crucible bracket.
Standard
ISO 9185:2007
Size: 1000mm (L) * 1000mm (W) * 1500mm (H)
Weight: 180KG
Installation requirements: Electricity requirements: 220V, 10A;
380V, 60A
Ambient temperature: 10 ℃ to 35 ℃
Gas requirements: air compressor air source, external diameter 8mm
Water source requirement: tap water source, external diameter 15 mm
How are fire protection products tested?
Many fire tests are run by official laboratories for the purpose of
product certification. However, some manufacturers of fire
protection products also maintain their own facilities and run
tests for R & D purposes before going to the expense and exposure
of a test at a third party facility.
Anti-Liquid Molten Metal Splash Test Device.pdf
