ASTM D92 Flash Point Oil Analysis Equipment Open Cup Flash Point
Tester
Description Of Opened Cup Flash Point Tester
The fully automatic open flash point tester is designed and
manufactured in accordance with the requirements specified in the
People's Republic of China standard GB/T3536-2008 Determination of
Flash Point and Ignition Point of Petroleum Products Cleveland Open
Cup Method. It is applicable to the determination of the flash
point and ignition point of petroleum products other than fuel oil,
whose open cup flash point is higher than 79 ℃ according to the
method specified in this standard.
This instrument is a fully automatic open flash point tester, which
is an ideal substitute for similar imported instruments. It can be
widely used in railway, aviation, electric power, oil industry and
scientific research departments.
Features
1. It adopts 8-inch true color LCD, touch screen and Chinese
man-machine dialogue interface. It has prompt menu and guided input
mode for expected flash point, sample label, atmospheric pressure,
test date and other parameters.
2. The function curve of temperature rise and test time is
simulated and tracked, with Chinese misoperation software prompt
modification function, test date, test time and other parameters
prompt function.
3. Equipped with a standard 232 interface or USB interface to
connect with the computer to automatically upload data. It can be
connected to the LIMIS system.
4. 120 groups of data can be stored, which can be connected with
the computer to store data in large capacity and for a long time.
5. Automatically correct the influence of atmospheric pressure on
the test and calculate the correction value.
6. Differential detection, automatic correction of system
deviation.
7. The data scanning, detection and printing are completed
automatically, and the test arm is raised and lowered
automatically.
8. Automatic air cooling
Specifications
| Working power supply | AC (220 ± 10%) V, 50Hz |
| Temperature measurement range | room temperature~400 ℃;Temperature display unit0.1 ℃ |
| Repeatability | ≤ 8 ℃ (flash point and fire point) |
| Reproducibility | ≤ 17 ℃ (flash point), ≤ 14 ℃ (fire point) |
| Heating rate | in accordance with GB/T3536-2008 standard |
| Ignition mode | gas flame, electronic ignition, optional |
| Ambient temperature | (10~40) ℃ |
| Relative humidity | ≤ 80% |
| Power consumption of the whole machine | no more than 500W |
| Boundary dimension | (when the lifting arm is not lifted) 520mm × 360㎜ × 310 ㎜ (long ×
wide × High); (When the lifting arm is lifted) 520mm × 360㎜ × 420 ㎜
(long × wide × High) |
